20–40kW DC Wallbox Charger for Commercial EV Charging
G201
The Tonhe G201 is a compact 20–40kW DC wallbox EV charger designed for commercial parking, shopping malls, underground garages, offices and other destination-charging locations. With a single-gun full-power output, flexible connector options and a 200–1000V DC output range, the G201 provides a practical charging solution for different EV models and site requirements.
Get a quote
Share
DC Wallbox Charger for Commercial EV Charging
The Tonhe G201 combines a compact wallbox format with configurable DC charging power for commercial and parking applications. It is designed for sites where DC charging is required but the charging infrastructure does not call for the higher power levels or larger footprint of high-power charging systems.
The G201 is available in 20kW, 30kW and 40kW configurations, allowing the charging power to be selected according to the project's requirements. Its 200–1000V DC output range provides compatibility with different EV battery voltage requirements, while output current can reach up to 125A within the rated configuration.
For charging compatibility, the G201 supports CCS1, CCS2 and GB/T standards according to the selected configuration. The single-gun design delivers the available charging power to one vehicle at a time, providing a straightforward configuration for commercial parking and destination charging.
For networked charging applications, the G201 supports OCPP 1.6, with Ethernet communication and optional 4G/Wi-Fi connectivity according to project requirements. Charging can also be initiated through QR code, card or VIN-based methods.
The G201 is available in 20kW, 30kW and 40kW configurations, allowing the charging power to be selected according to the project's requirements. Its 200–1000V DC output range provides compatibility with different EV battery voltage requirements, while output current can reach up to 125A within the rated configuration.
For charging compatibility, the G201 supports CCS1, CCS2 and GB/T standards according to the selected configuration. The single-gun design delivers the available charging power to one vehicle at a time, providing a straightforward configuration for commercial parking and destination charging.
For networked charging applications, the G201 supports OCPP 1.6, with Ethernet communication and optional 4G/Wi-Fi connectivity according to project requirements. Charging can also be initiated through QR code, card or VIN-based methods.
20–40kW DC Charger for Flexible Commercial Charging
The G201 is built around a configurable 20–40kW DC charging platform, with three available power options: 20kW, 30kW and 40kW.
This range allows project developers and charging operators to select a suitable output level according to the expected charging demand, available electrical capacity and intended application. A 20kW configuration can be used where moderate DC charging power is required, while the 30kW and 40kW configurations provide higher charging power for locations with greater charging demand.
All three configurations use the same G201 product platform, helping maintain a consistent product format across different project requirements.
The configurable power range also gives commercial charging projects greater flexibility when planning different sites or market requirements without changing to a completely different charger platform.
This range allows project developers and charging operators to select a suitable output level according to the expected charging demand, available electrical capacity and intended application. A 20kW configuration can be used where moderate DC charging power is required, while the 30kW and 40kW configurations provide higher charging power for locations with greater charging demand.
All three configurations use the same G201 product platform, helping maintain a consistent product format across different project requirements.
The configurable power range also gives commercial charging projects greater flexibility when planning different sites or market requirements without changing to a completely different charger platform.
200–1000V DC Output for Flexible EV Charging
The G201 provides a 200–1000V DC output range, allowing it to accommodate EVs with different battery voltage requirements within the charger's specified operating range.
The wide output voltage range is particularly relevant for commercial charging environments where different vehicle models may use different battery system voltages. Instead of being limited to a narrow DC voltage range, the G201 can provide charging across a broad voltage window according to the connected vehicle and configured charging power.
The charger supports output current of up to 125A. Together with the available 20kW, 30kW and 40kW configurations, this provides a flexible DC charging platform for parking facilities, commercial locations and destination charging applications.
The wide output voltage range is particularly relevant for commercial charging environments where different vehicle models may use different battery system voltages. Instead of being limited to a narrow DC voltage range, the G201 can provide charging across a broad voltage window according to the connected vehicle and configured charging power.
The charger supports output current of up to 125A. Together with the available 20kW, 30kW and 40kW configurations, this provides a flexible DC charging platform for parking facilities, commercial locations and destination charging applications.
CCS1, CCS2 and GB/T DC Charging Compatibility
The G201 supports CCS1, CCS2 and GB/T charging standards, allowing the product platform to be configured for different markets and vehicle requirements.
Different regions and vehicle markets use different DC charging interfaces. By providing multiple connector options, the G201 can be configured according to the target market instead of using a single connector configuration for every project.
For charging equipment distributors, system integrators and commercial charging operators, this makes the G201 suitable for projects with different regional charging requirements. The appropriate charging interface can be selected according to the target vehicles and local market requirements.
The G201 uses a single-gun configuration, so the selected charging connector provides the available charging power to one vehicle during charging.
Different regions and vehicle markets use different DC charging interfaces. By providing multiple connector options, the G201 can be configured according to the target market instead of using a single connector configuration for every project.
For charging equipment distributors, system integrators and commercial charging operators, this makes the G201 suitable for projects with different regional charging requirements. The appropriate charging interface can be selected according to the target vehicles and local market requirements.
The G201 uses a single-gun configuration, so the selected charging connector provides the available charging power to one vehicle during charging.
OCPP 1.6 EV Charger for Networked Charging
The G201 supports OCPP 1.6 communication, providing a standard communication interface for integration into networked EV charging systems.
Ethernet connectivity is available for network communication, while 4G/Wi-Fi can be optionally configured according to project requirements. This allows the communication method to be selected according to the installation environment and network architecture.
The G201 also supports several charging start methods, including QR code, card and VIN. These options allow charging operators to configure the user access method according to the requirements of the charging site.
For projects that require connected charging equipment, the G201 can therefore combine its DC charging hardware with OCPP-based communication and different network access options.
Ethernet connectivity is available for network communication, while 4G/Wi-Fi can be optionally configured according to project requirements. This allows the communication method to be selected according to the installation environment and network architecture.
The G201 also supports several charging start methods, including QR code, card and VIN. These options allow charging operators to configure the user access method according to the requirements of the charging site.
For projects that require connected charging equipment, the G201 can therefore combine its DC charging hardware with OCPP-based communication and different network access options.
Single-Gun Full-Power DC Charging
The G201 uses a single-gun charging configuration, with the available charging power delivered through one charging connector.
This configuration is suitable for charging locations where vehicles are charged individually rather than through multiple simultaneous charging outputs. The single-gun structure also gives the product a straightforward operating configuration for commercial parking and destination charging applications.
When configured as a 20kW, 30kW or 40kW model, the corresponding rated charging power is available through the single charging gun within the product's specified operating conditions.
For sites where the primary requirement is to provide DC charging to one parked vehicle at a time, the single-gun design provides a direct and uncomplicated charging configuration.
This configuration is suitable for charging locations where vehicles are charged individually rather than through multiple simultaneous charging outputs. The single-gun structure also gives the product a straightforward operating configuration for commercial parking and destination charging applications.
When configured as a 20kW, 30kW or 40kW model, the corresponding rated charging power is available through the single charging gun within the product's specified operating conditions.
For sites where the primary requirement is to provide DC charging to one parked vehicle at a time, the single-gun design provides a direct and uncomplicated charging configuration.
Comprehensive Protection for Reliable DC Charging
The G201 incorporates multiple protection functions covering electrical faults, temperature conditions and emergency operation during the charging process.
The protection system includes over-current, over-voltage, under-voltage, over-temperature and short-circuit protection, helping protect the charging system when abnormal electrical or operating conditions occur.
The charger also supports emergency shutdown and surge/lightning protection. These functions are designed to provide additional protection for the charging equipment and connected system under specified operating conditions.
The G201 has an IP54 protection rating, supporting its intended commercial charging applications.
The protection system includes over-current, over-voltage, under-voltage, over-temperature and short-circuit protection, helping protect the charging system when abnormal electrical or operating conditions occur.
The charger also supports emergency shutdown and surge/lightning protection. These functions are designed to provide additional protection for the charging equipment and connected system under specified operating conditions.
The G201 has an IP54 protection rating, supporting its intended commercial charging applications.
Protection Functions
- Over-current protection
- Over-voltage protection
- Under-voltage protection
- Over-temperature protection
- Short-circuit protection
- Emergency shutdown
- Surge / lightning protection
- IP54 protection
Air-Cooled DC Charger for Commercial Applications
The G201 uses an air-cooling system to dissipate heat generated during DC charging operation.
The charger is designed for an operating temperature range of -25°C to +50°C, allowing it to be used across a range of commercial charging environments within its specified operating conditions.
The G201 is specified for installation at an altitude of up to 2000m. Combined with its IP54 protection rating, these specifications define the environmental conditions for which the charger is designed.
Operating Specifications
Cooling: Air Cooling
Operating Temperature: -25°C to +50°C
Installation Altitude: ≤2000m
Protection Rating: IP54
Operating Temperature: -25°C to +50°C
Installation Altitude: ≤2000m
Protection Rating: IP54
Wall-Mounted or Column-Mounted DC Charger
The G201 supports both wall-mounted and column-mounted installation, giving charging project designers flexibility when adapting the charger to different site layouts.
For locations with suitable wall space, the wall-mounted configuration can help integrate the charger directly into the existing parking or building structure. Where wall installation is not practical, a column-mounted configuration can be used according to the site's installation design.
This flexibility makes the G201 suitable for different commercial parking layouts, provided that the selected installation method meets the project's installation and electrical requirements.
For locations with suitable wall space, the wall-mounted configuration can help integrate the charger directly into the existing parking or building structure. Where wall installation is not practical, a column-mounted configuration can be used according to the site's installation design.
This flexibility makes the G201 suitable for different commercial parking layouts, provided that the selected installation method meets the project's installation and electrical requirements.
Commercial DC Charger for Parking and Destination Charging
The G201 is designed for commercial locations where vehicles remain parked while charging and where a compact DC charging solution is required.
Its 20–40kW power range provides a practical option between lower-power AC charging and higher-power DC charging systems. This makes the G201 suitable for sites where charging speed is important but extremely high charging power is not the primary requirement.
Shopping Mall Charging
The G201 can be used in shopping mall parking facilities where EV drivers may leave their vehicles parked while shopping or using other commercial services. The 20–40kW DC charging range provides DC charging capability without requiring the footprint of a larger high-power charging system.
Underground Parking
For suitable underground parking facilities, the compact wallbox format can be integrated into designated charging spaces. Installation should be planned according to the site's electrical, ventilation, access and safety requirements.
Commercial Parking
The G201 can provide DC charging for commercial parking facilities that serve employees, customers, tenants or other EV users. Its configurable power options allow different sites to select a suitable 20kW, 30kW or 40kW configuration.
Destination Charging
For destination charging locations where vehicles remain parked for a period of time, the G201 provides DC charging through a compact single-gun configuration.
Its 20–40kW power range provides a practical option between lower-power AC charging and higher-power DC charging systems. This makes the G201 suitable for sites where charging speed is important but extremely high charging power is not the primary requirement.
Shopping Mall Charging
The G201 can be used in shopping mall parking facilities where EV drivers may leave their vehicles parked while shopping or using other commercial services. The 20–40kW DC charging range provides DC charging capability without requiring the footprint of a larger high-power charging system.
Underground Parking
For suitable underground parking facilities, the compact wallbox format can be integrated into designated charging spaces. Installation should be planned according to the site's electrical, ventilation, access and safety requirements.
Commercial Parking
The G201 can provide DC charging for commercial parking facilities that serve employees, customers, tenants or other EV users. Its configurable power options allow different sites to select a suitable 20kW, 30kW or 40kW configuration.
Destination Charging
For destination charging locations where vehicles remain parked for a period of time, the G201 provides DC charging through a compact single-gun configuration.
G201 DC Wallbox Charger Specifications
The G201 integrates configurable DC charging power, a wide output voltage range, multiple charging standards and network communication into a compact DC wallbox charger platform.
The following specifications define the standard product configuration and operating range.
The following specifications define the standard product configuration and operating range.
| Parameter | |
| Net Weight | approx. 36 kg (modules excluded) |
| Dimensions (W×D×H) | 420.6*249.1*700mm(W×D×H) |
| Output Current (Default Config.) | 0~125A GB/T 0~125A CCS2 0~125A CCS1 Note: If output current is lower than default, select cable according to actual current. |
| AC Input Voltage | 3 phase+N+PE,400Vac±15% (Default) |
| AC Input Frequency | 50 Hz / 60 Hz ±10% |
| Output Voltage Range | 200VDC~1000VDC |
| Power Distribution | Single gun: full power |
| IP Protection Rating | IP54 |
| Cooling Method | Air Cooling |
| Protection Features | Short circuit / Over-temperature / Over-currentUnder-voltage / Over-voltage / Emergency stop / Surge protection |
| Operating Temperature | -25℃～+50℃ |
| Display Screen | 7"/ 10.1" |
| Altitude | ≤2000m |
| Charging Cable Length | approx. 5 m (outside cabinet) |
| Peak Efficiency | ≥95% |
| Power Factor | ≥0.99 |
Why Choose the Tonhe G201 DC Wallbox Charger?
The G201 is designed around a clear commercial charging requirement: provide configurable DC charging power in a compact wallbox format while supporting different vehicle charging standards and network communication requirements.
20–40kW Flexible Power
The G201 is available in 20kW, 30kW and 40kW configurations, allowing the charging power to be selected according to the requirements of different commercial sites.
Wide 200–1000V DC Output
The 200–1000V DC output range allows the charger to accommodate different EV battery voltage requirements within its specified operating range.
CCS1, CCS2 and GB/T
Multiple charging standards allow the G201 platform to be configured for different regional markets and vehicle requirements.
OCPP 1.6 Communication
OCPP 1.6 support enables the charger to be integrated into networked charging systems, with Ethernet and optional 4G/Wi-Fi communication available according to project requirements.
Flexible Installation
Wall-mounted and column-mounted configurations allow the charger to be adapted to different parking and charging site layouts.
Commercial Charging Applications
The combination of 20–40kW DC charging, single-gun operation and compact installation makes the G201 suitable for commercial parking, shopping malls, underground parking and destination charging applications.
20–40kW Flexible Power
The G201 is available in 20kW, 30kW and 40kW configurations, allowing the charging power to be selected according to the requirements of different commercial sites.
Wide 200–1000V DC Output
The 200–1000V DC output range allows the charger to accommodate different EV battery voltage requirements within its specified operating range.
CCS1, CCS2 and GB/T
Multiple charging standards allow the G201 platform to be configured for different regional markets and vehicle requirements.
OCPP 1.6 Communication
OCPP 1.6 support enables the charger to be integrated into networked charging systems, with Ethernet and optional 4G/Wi-Fi communication available according to project requirements.
Flexible Installation
Wall-mounted and column-mounted configurations allow the charger to be adapted to different parking and charging site layouts.
Commercial Charging Applications
The combination of 20–40kW DC charging, single-gun operation and compact installation makes the G201 suitable for commercial parking, shopping malls, underground parking and destination charging applications.
Frequently Asked Questions About the G201 DC Wallbox Charger
1, What is the power range of the G201 DC Wallbox Charger?
The Tonhe G201 is available in 20kW, 30kW and 40kW configurations. The selected power level can be matched to the charging requirements and electrical capacity of the target installation.
2, What is a 40kW DC Wallbox Charger?
A 40kW DC wallbox charger provides up to 40kW of DC charging power in a compact wallbox-format charger. The G201 is available in a 40kW configuration and is designed for commercial parking and destination charging applications.
3, What is a 20kW DC Charger used for?
A 20kW DC charger can be used in commercial parking, destination charging and other locations where vehicles remain parked while charging. The G201 provides a 20kW configuration within its 20–40kW product range.
4, What is the output voltage range of the G201?
The G201 provides a 200–1000V DC output range and supports maximum output current of up to 125A, within the product's rated power configuration.
5, Is the G201 a DC fast charger?
The G201 is a 20–40kW DC wallbox charger designed for low-power DC fast-charging and commercial parking applications. It provides DC charging in a compact wallbox format rather than the higher power range of Tonhe's high-power charging products.
6, Which charging standards does the G201 support?
The G201 supports CCS1, CCS2 and GB/T charging standards. The appropriate charging interface can be selected according to the target market and project requirements.
7, Does the G201 support OCPP 1.6?
Yes. The G201 supports OCPP 1.6 communication. Ethernet is available, with optional 4G/Wi-Fi connectivity according to project requirements.
8, Is the G201 suitable for commercial DC charging?
Yes. The G201 is designed for commercial DC charging applications, including shopping mall parking, underground parking, commercial parking and destination charging.
9, Can the G201 be wall mounted?
Yes. The G201 supports both wall-mounted and column-mounted installation, allowing the installation method to be selected according to the site's layout and mounting conditions.
10, What cooling method does the G201 use?
The G201 uses air cooling. Its specified operating temperature range is -25°C to +50°C, with an installation altitude of up to 2000m.
