320–800kW High Power DC Fast Charger for Fleet and Highway EV Charging
G32.
The G32 is an integrated high power DC fast charger solution designed for highway charging stations, public EV charging hubs, bus depots and commercial fleet operations. Available from 320kW to 800kW, it delivers reliable DC charging with broad vehicle compatibility and connected operation capabilities.
Get a quote
Share
High-Power Charging for Demanding EV Operations
Built for locations where charging speed, vehicle turnover and operational reliability matter, the G32 high power DC fast charger supports scalable charging power from 320kW to 800kW. It is designed for commercial EV charging projects that require more than conventional destination charging equipment.
With a wide 200–1000V DC output range, the G32 can support a broad range of electric vehicle battery voltage platforms. Its integrated cabinet design combines high-power charging capability, user interaction and protection functions in one floor-mounted system, helping project developers simplify equipment selection for large charging sites.
Whether deployed at a highway service area, public charging hub, bus station or fleet depot, the G32 provides a practical charging solution for operators seeking high-throughput DC charging infrastructure.
With a wide 200–1000V DC output range, the G32 can support a broad range of electric vehicle battery voltage platforms. Its integrated cabinet design combines high-power charging capability, user interaction and protection functions in one floor-mounted system, helping project developers simplify equipment selection for large charging sites.
Whether deployed at a highway service area, public charging hub, bus station or fleet depot, the G32 provides a practical charging solution for operators seeking high-throughput DC charging infrastructure.
Scalable 320kW to 800kW DC Fast Charging Power
The G32 platform is available for high-power charging projects from 320kW to 800kW. This scalable power range allows operators to select an appropriate configuration based on site electrical capacity, expected vehicle traffic, charging duration and future expansion planning.
For single-vehicle charging, the system can deliver the full available power through one charging connector. For two simultaneous charging sessions, the G32 supports dual-gun operation with equal power sharing between the two outputs.
This configuration helps operators balance charging capacity and equipment utilization in busy commercial charging environments. The final power configuration should be selected according to local grid conditions, vehicle battery voltage, connector requirements and operating strategy.
Built for Highway Charging, Public Hubs and Fleet Depots
The G32 high power EV charging station is designed for applications where large numbers of vehicles, short dwell times or scheduled fleet operations require reliable DC fast charging capacity.
Highway DC Fast Charging Stations
Highway service areas and long-distance travel corridors require charging equipment that can support rapid vehicle turnover. The G32 is suitable for high-power highway EV charging stations where operators need to provide efficient DC charging for multiple vehicle types and changing traffic demand.
Bus Station and Depot Charging
Electric bus operations require dependable charging infrastructure that aligns with scheduled routes, depot dwell periods and centralized energy management. The G32 can be deployed at bus station charging points and depot facilities that require high-power DC charging capability for electric bus operations.
Commercial Fleet Charging Systems
For logistics fleets, corporate vehicle fleets and other high-utilization commercial operations, centralized DC charging can help improve vehicle readiness and simplify charging management. The G32 supports fleet charging systems that require high power, multi-standard connector options and connected operation capability.
200–1000V DC Output with CCS1, CCS2 and GB/T Options
The G32 provides a 200–1000V DC output range to accommodate a wide range of EV battery voltage platforms. It supports CCS1, CCS2 and GB/T charging standards, enabling project developers and charging operators to select connector options that match target vehicle fleets and regional market requirements.
The default output current configuration is up to 250A for GB/T and up to 200A for CCS1 and CCS2. Customized current specifications are available upon consultation for project-specific requirements.
Before final equipment selection, the required connector standard, output current, charging cable configuration and local vehicle compatibility should be confirmed with the project technical team.
The default output current configuration is up to 250A for GB/T and up to 200A for CCS1 and CCS2. Customized current specifications are available upon consultation for project-specific requirements.
Before final equipment selection, the required connector standard, output current, charging cable configuration and local vehicle compatibility should be confirmed with the project technical team.
Connected Charging Operations with OCPP Support
The G32 supports OCPP 1.6 communication and can be upgraded to OCPP 2.0.1, providing a foundation for connection with compatible charging management platforms. This helps charging operators integrate equipment into their operational workflow and manage charger status more efficiently.
Remote firmware upgrade capability supports ongoing product maintenance and software updates without relying exclusively on on-site service. For commercial charging networks, connected operation can help improve maintenance efficiency and support the long-term management of deployed charging assets.
The communication method, backend platform compatibility and project-specific network configuration should be confirmed before deployment.
Remote firmware upgrade capability supports ongoing product maintenance and software updates without relying exclusively on on-site service. For commercial charging networks, connected operation can help improve maintenance efficiency and support the long-term management of deployed charging assets.
The communication method, backend platform compatibility and project-specific network configuration should be confirmed before deployment.
Reliable Protection for Commercial DC Charging
The G32 is equipped with comprehensive protection functions designed to support stable commercial charging operation. Integrated safeguards include short-circuit protection, over-temperature protection, over-current protection, under-voltage protection, over-voltage protection, emergency stop and surge protection.
The charger features an IP54-rated enclosure and an air-cooled design. It is designed to operate in ambient temperatures from −25°C to +50°C and at altitudes up to 2,000m, subject to proper installation and project environmental conditions.
These protective functions help support reliable operation in public charging stations, fleet depots and other commercial charging environments.
Integrated Cabinet Design for High-Power Charging Projects
The G32 is built in a floor-mounted integrated cabinet format for high-power DC charging projects. The cabinet measures 1400 × 800 × 1900mm and has an approximate net weight of 460kg, excluding charging modules.
A 7-inch or 10.1-inch display is available for user interaction, while the charging cable length is approximately 5m outside the cabinet. The integrated structure helps provide a consolidated equipment solution for commercial charging sites that require high charging capacity within a centralized installation footprint.
For project planning, installers should confirm equipment placement, foundation requirements, cable routing, electrical distribution, maintenance clearance and local installation codes before deployment.
G32 High Power DC Fast Charger Specifications
| Parameter | Specification |
|---|---|
| Product Model | G32 Integrated DC Charger |
| Charging Power Range | 320–800kW |
| AC Input Voltage | 3 Phase + N + PE, 400Vac ±15% standard; 480Vac ±10% optional |
| AC Input Frequency | 50Hz / 60Hz ±10% |
| DC Output Voltage Range | 200–1000VDC |
| Default Output Current | GB/T: 0–250A; CCS1: 0–200A; CCS2: 0–200A |
| Charging Standards | CCS1, CCS2, GB/T |
| Power Distribution | Single gun: full power; dual gun: equal power sharing |
| Peak Efficiency | ≥95% |
| Power Factor | ≥0.99 |
| Communication Protocol | OCPP 1.6, upgradeable to OCPP 2.0.1 |
| Cooling Method | Air Cooling |
| Ingress Protection | IP54 |
| Operating Temperature | −25°C to +50°C |
| Altitude | ≤2,000m |
| Display Screen | 7-inch / 10.1-inch |
| Charging Cable Length | Approx. 5m outside cabinet |
| Dimensions | 1400 × 800 × 1900mm |
| Net Weight | Approx. 460kg, charging modules excluded |
| Protection Functions | Short circuit, over-temperature, over-current, under-voltage, over-voltage, emergency stop and surge protection |
*Specifications are subject to final configuration and project requirements. Please contact us for detailed technical documentation, connector configuration and customized current options.
Frequently Asked Questions
1.What charging power options are available for the G32?
The G32 is available from 320kW to 800kW for high-power commercial EV charging projects. The final configuration can be selected according to site power capacity, charging demand, target vehicle types and project requirements.
2.Is the G32 suitable for highway EV charging stations?
Yes. The G32 is designed for applications including highway fast charging stations, bus station charging points and fleet operation charging systems where high-power DC charging capacity is required.
3.Which connector standards does the G32 support?
The G32 supports CCS1, CCS2 and GB/T charging standards. The appropriate connector option should be selected according to the target market, vehicle fleet and project specification.
4.What is the DC output voltage range?
The G32 provides a DC output voltage range from 200VDC to 1000VDC, supporting a broad range of EV battery voltage platforms.
5.How does the dual-gun charging mode work?
In single-gun mode, the G32 delivers the full available power through one charging connector. In dual-gun mode, the available power is equally shared between the two charging outputs.
6.Does the G32 support OCPP?
Yes. The G32 supports OCPP 1.6 and is upgradeable to OCPP 2.0.1. It also supports remote firmware upgrades for connected charging operation and maintenance.
7.Can the output current be customized?
The default output current is up to 250A for GB/T and up to 200A for CCS1 and CCS2. Customized current specifications are available upon consultation based on project requirements.
