EV Charger
You are here: Home » EV CHARGER » EV Charging Module » 30kW EV Charging Module » 30kW Low Noise Ev Charger DC Power Module

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

30kW Low Noise Ev Charger DC Power Module

TH30F10030C9-WT is a low-noise, low-power, high-efficiency, high-power density, ultra-wide constant power range AC/DC module developed by Tonhe for charging piles. 
This product supports 285VAC-475VAC (line voltage) three-phase four-wire system (three-phase +PE) input, rated output power 30KW, constant power range 300-1000VDC, and the high temperature within 50℃ without derating the full output range. 
The charging module communicates with the main monitor through the CAN bus to realize the parameter setting of the charging module, collect the operating parameters of the charging module, and control the working state of the charging module.
Availability:
Quantity:
  • TH30F10030C9-WT

  • Tonhe

  • 8504409999

Product introduction


TH30F10030C9-WT is a low-noise, low-power, high-efficiency, high-power density, ultra-wide constant power range AC/DC module developed by Tonhe for charging piles.

This product supports 285VAC-475VAC (line voltage) three-phase four-wire system (three-phase +PE) input, rated output power 30KW, constant power range 300-1000VDC, and the high temperature within 50℃ without derating the full output range.

The charging module communicates with the main monitor through the CAN bus to realize the parameter setting of the charging module, collect the operating parameters of the charging module, and control the working state of the charging module.



Model No

TH30F10030C9-WT

AC input

Input voltage

Rated voltage 380VAC, three phase no center line,operating range 285-475VAC

Input frequency

50±5Hz

Input power factor

≥0.99

Input overvoltage protection

487±10VAC

Input undervoltage protection

270±10VAC

DC output

Rated output power

30kW

Output voltage range

50~1000VDC

Output current range

0.5~100A

Output constant power range

When output is 300-1000VDC, constant 30kW output.

Output features

Peak efficiency

≥96.5%

Soft start time

3~8S

Short circuit protection

Self-rollback protection

Voltage regulation accuracy

≤±0.5%

THD

≤5%

Current regulation accuracy

≤±1%

Current sharing imbalance

≤±5%

Operating environment

Operating temperature

-30℃-+75℃

Relative humidity

≤95% no condensation

Altitude

≤2000m, derating above 2000m

Product Features

Cooling method

Fan cooling

Standby power consumption

<6W

Communication Protocol

CAN

Address setting

Digital screen display, keys operation

Module dimension (without handle)

437.5*300*84mm(L*W*H)

Weight

≤16kg

MTBF

500000 hours


Automated production of Smart EV charging modules



Production Center


Tonhe Technology passed the ISO9001 quality management system, IATF16949 automotive quality management system certification, The manufacturing center has 2 fully automatic SMT assembly lines, automatic solder paste printing and inspection instrument,plug-in wave soldering assembly line, automatic three-protective spraying line, aging detection line, advanced technology, complete supporting facilities, perfect quality assurance, more than 500,000 units of charging modules annual output, from here to the world after over 50 production processes.

车间大图

Workshop of Smart EV charging modules


Automatic debugging

Debugging of the 20kw smart EV Charging modules

Final assembly

Assembling of the 20kw Smart EV charging modules

aging

Aging of the 20kw smart EV charging modules


Test Center


Tonhe Technology has owned a first-class EMC laboratory, which has been certified by both CNAS (China National Accreditation for Conformity Assessment ) and DiLAC (National Defense Science, Technology and Industry Laboratory Accreditation Committee).


charging module test

charging power module test lab

World-class standard semi anechoic 3m EMC chamber is designed and built by FRANKONIA from Germany, it can be used for radiated emission and radiated immunity test of information technology equipment, charger, electric power equipment, industrial medical equipment and automotive electronic parts & components.

charging module test

ev charger test

Chroma electric load, AC Source; Yokogawa WT1800 high performance power analyzer; Fluke 8808A 5.5 digits desktop digital multimeter; -60℃-+150℃ temperature and humidity test chamber. Equipped 2 300kVA AC stable power supply, 2 sets of 200kW DC load, a 17㎡ step-in temperature and humidity test chamber, charger system test could be done.

ev charger test

ev charger test

AXOS8 test system integrates surge, EFT and DIPs tests in one, which is convenient and reliable! First-class transient immunity laboratory is built by HAEFELY from Switzerland.


Certificate Showcase


ev charging module certigicate


Packaging & Shipping


ev charger shipping


FAQ


1 What are modules of communication protocol?

For our EV charging modules communication protocol is CAN and the CAN baud rate is 125kbs, the CAN voltage level is 5v.


2. Do the modules support glue filling?

Yes, All series modules can support glue filling.


3. What are the requirements for the installation method of the charging module?

The charging module can be installed horizontally, side standing or upside down. If upside down installation is used, please contact our company to customize the front panel without a handle.


4. How do you handle shipments?

1) For small orders, we send goods by FedEx, DHL, UPS, express service on door to door term.

2) For large shipments, we send goods by sea or by air in containers.

Ps. it's highly recommended to delegate your own forwarders to handle shipments and FOB Shijiazhuang is widely adopted by our customers.


5. What is your delivery time?

Factory direct sales and we could offer the short lead time. Normally, we need about 7days quantity at least 10pcs. And the samples in stock and do not worried. For orders in large quantities and customized orders, the time for shipment will be a little longer, we need 35 days to coordinate with our workshop to give accurate time frame to our customers.


6 .What is your term of payment?

Our standard term is 100% TT advance with order. However, it is negotiable under the condition of long-term strategic cooperation, there will 50% in advance and 50% before the delivery, or 30% at first and 70%when the goods are ready, all the details and we could negotiate them according your project progress.


7. What are your customized services?

The OEM and ODM solutions could available, we could write your company name, logo and model number on nameplate, also the colour and shape you also could send your requirements and we offer the solution.


8. How long is the warranty?

Standard warranty is 12 months upon the receipt of shipment.


9.Can you provide after-sale service?

We can provide both online and on-site after-sale service depending on respective contract and actual conditions. Considering the project, We promise 24hr-response scheme.


10. What certifications have you obtained for your company and products?

The ISO9001, IATF16949 automobile quality management system certification and double software certification; CE, TUV, etc., For now, our charging modules&EV chargers have been exported to overseas countries, including Australia, Russia, Germany, Italy, Turkey, India, Poland, Thailand, Singapore, Vietnam, Brazil, Colombia, etc.

Previous: 
Next: